Arc Flash Reference

Data record std.nfpa-70e.structure.110-2-b-when-required

Verified 2026-10-27 Confidence: High

Clause 110.2(B) of NFPA 70E-2027 requires energized conductors and circuit parts at or above the voltage threshold it states, or wherever an electrical hazard exists, to be put into an electrically safe work condition before work when the employee is inside the limited approach boundary or interacts with equipment whose parts are not exposed but where an increased likelihood of arc flash injury exists.

ProvenanceNFPA 70E-2027 supports data record std.nfpa-70e.structure.110-2-b-when-required, which is cited on the entry Standard for Electrical Safety in the Workplace.SOURCENFPA 70E-2027NFPA 70E-2027Licensed standard, clause 110.2(B)DATA RECORDstd.nfpa-70e.structure.110-2-b-when-requiredstd.nfpa-70e.structure.1..Verified 2026-10-27ENTRYStandard for Electrical Safety in the WorkplaceStandard for Electrical ..No revisions
Provenance. Where this record comes from and where it is used: the cited source, the record itself and the entry that cites it.
Provenance: the chain from source to entry.
StepItemDetail
SourceNFPA 70E-2027Licensed standard, clause 110.2(B)
Data recordstd.nfpa-70e.structure.110-2-b-when-requiredVerified 2026-10-27
EntryStandard for Electrical Safety in the WorkplaceNo revisions
Subject
Standard for Electrical Safety in the Workplace (Standards)
Kind
Standard scope
Source
NFPA 70E-2027, clause 110.2(B), Standard for Electrical Safety in the Workplace, NFPA. Publisher page

History

Every recorded change to this data record, oldest first.
DateChange
2026-10-27created

Cite this page

Cite the governing standard for the fact itself; cite this page as the finding aid.

"Data record std.nfpa-70e.structure.110-2-b-when-required." Arc Flash Reference. 2026-10-27. https://www.arcflashreference.com/data/std.nfpa-70e.structure.110-2-b-when-required/.