Data record std.ieee-1584.structure.single-phase-and-dc

Verified 2026-10-24 Confidence: Medium

Clauses 4.11 and 4.12 of IEEE 1584-2018 state that single-phase alternating-current and direct-current arcs are not covered by the model; for single-phase systems the guide suggests a conservative use of the three-phase equations, and for direct current it points to published papers in its bibliography.

ProvenanceIEEE 1584-2018 supports data record std.ieee-1584.structure.single-phase-and-dc, which is cited on the entry IEEE Guide for Performing Arc-Flash Hazard Calculations.SOURCEIEEE 1584-2018IEEE 1584-2018Licensed standard, clause 4.11, 4.12DATA RECORDstd.ieee-1584.structure.single-phase-and-dcstd.ieee-1584.structure...Verified 2026-10-24ENTRYIEEE Guide for Performing Arc-Flash Hazard CalculationsIEEE Guide for Performin..No revisions
Provenance. Where this record comes from and where it is used: the cited source, the record itself and the entry that cites it.
Provenance: the chain from source to entry.
StepItemDetail
SourceIEEE 1584-2018Licensed standard, clause 4.11, 4.12
Data recordstd.ieee-1584.structure.single-phase-and-dcVerified 2026-10-24
EntryIEEE Guide for Performing Arc-Flash Hazard CalculationsNo revisions
Subject
IEEE Guide for Performing Arc-Flash Hazard Calculations (Standards)
Kind
Standard scope
Source
IEEE 1584-2018, clause 4.11, 4.12, Guide for Performing Arc-Flash Hazard Calculations, IEEE.

History

Every recorded change to this data record, oldest first.
DateChange
2026-10-24created
2026-10-24review_status unreviewed -> software_reviewed

Cite this page

Cite the governing standard for the fact itself; cite this page as the finding aid.

"Data record std.ieee-1584.structure.single-phase-and-dc." Arc Flash Reference. 2026-10-24. https://www.arcflashreference.com/data/std.ieee-1584.structure.single-phase-and-dc/.